Available

GaugeFlow QMS

Quality management for CNC machine shops: inspections, first article inspection on AS9102 forms, document control, and gauge and calibration records.

Sample printed first article inspection report, AS9102 Form 3, for FAI-0142, part 40-1187-03 rev C, job J-2291, on a steel bench: 17 characteristics with requirement, results, gauge and status; 14 are recorded and initialed and dated in pen, 3 are still open.
Sample first article inspection report, AS9102 Form 3, for FAI-0142: 14 of 17 characteristics recorded. Sample data.

What it does

Inspection, documents and gauges in one application.

QMS keeps the records that come with the parts: inspections, first articles, controlled documents, and gauge and calibration records.

Pin gauge set in an open charcoal case, steel pins standing in a printed rack and two pins lying in front of it.
Rendering of a sample pin gauge set. Sample data.

Inspections

Record inspections for the parts you make. Each record shows the part and its result.

GaugeFlow QMS · Inspections. A picture of the screen, with sample data.

First article inspection

Keep first article inspections on AS9102 forms: every characteristic, its result, and how many are recorded so far.

Sample printed first article inspection report, AS9102 Form 3, for FAI-0142, part 40-1187-03 rev C, job J-2291, on a steel bench: 17 characteristics with requirement, results, gauge and status; 14 are recorded and initialed and dated in pen, 3 are still open.
Sample first article inspection report, AS9102 Form 3, for FAI-0142: 14 of 17 characteristics recorded. Sample data.
GaugeFlow QMS · First article, AS9102 Form 3. A picture of the screen, with sample data.

Document control

Keep controlled documents and their revisions in one place, with the status of each revision.

Sample engineering drawing 40-1187-03 revision C, bracket, mounting, printed on a B-size sheet lying on a steel bench: top, front and right views, section A-A and an isometric view, ballooned in red for first article FAI-0142 with characteristics 1 to 17, pencil ticks beside the recorded ones and a first article inspection stamp.
Sample drawing 40-1187-03 revision C, bracket, mounting, ballooned for first article FAI-0142. Sample data, not a customer part.
GaugeFlow QMS · Controlled documents. A picture of the screen, with sample data.

Gauge and calibration records

Keep a record of each gauge and its calibration. The list shows when each gauge is due.

Sample printed gauge calibration record on a steel bench: six gauges with the dates each was last calibrated and is next due; the two due within 30 days, bore gauge GA-0231 and micrometer MIC-007, are marked with a yellow highlighter and pen notes.
Sample gauge calibration record: six gauges, two due within 30 days. Sample data.
GaugeFlow QMS · Gauges and calibration. A picture of the screen, with sample data.

On the shop floor

Tablet inspections

Inspectors record measurements at the machine, one characteristic at a time.

A tablet operator signs in with a PIN, opens an inspection assigned to them and enters each measured value, beside the drawing with that characteristic marked. PASS or FAIL is calculated from the limits, and each saved measurement keeps who measured it, when, and the gauge that was chosen. Tablet seats can be added to the Professional and Aerospace & Medical plans.

Sample shop tablet in a dark rubber case on a steel bench, showing a GaugeFlow QMS tablet inspection: first article FAI-0142, part 40-1187-03 rev C, job J-2291, inspector J. Morales. Characteristic 7, slot width, is open with the drawing on the left and, on the right, minimum 8 mm, maximum 8.05 mm, a measured value of 8.02 mm marked PASS and pin gauge PG-0412 as the measurement tool; 15 of 17 measurements are complete. Two pin gauges lie beside the tablet.
Sample tablet inspection in GaugeFlow QMS: characteristic 7 of first article FAI-0142, measured with pin gauge PG-0412. Sample data.

At a glance

Status
Available
Type
Server app
Plans
Starter, Professional, Aerospace & Medical
Seats
Full users and tablet seats
Pricing and purchase
From $149 a month

Products

The other two products.

Available

GaugeFlow ERP

Business software for job shops.

Sample printed job traveler for job J-2291, part 40-1187-03 rev C: six operations from saw to inspection, with operator initials, dates and inspection stamps.
Sample job traveler for job J-2291, part 40-1187-03 revision C. Sample data.
Launching soon

GaugeFlow Defense

Compliance preparation for shops that do defense work.

A stack of sample compliance evidence documents on a desk: an access control policy signed in pen, a workstation configuration checklist ticked in pen, and a printed screen capture with a security log excerpt.
Sample evidence documents for a fictional company, Example Precision Fabrication. GaugeFlow Defense is launching soon.

Ask about QMS.

Tell us what you make and what you want to know.